Change of BLOG Address



Dear readers and friends,


This blog will be deleted due to malfunction. It have been hacked by other parties.


Hope that we will keep in touch in my new BLOG address as below :


http://processoilgas.blogspot.com/


Thanks for all your supports.


Regards.

Oil and Gas Jobs in Pasir Gudang


Urgently needed below candidates, please reply me at camoustars@yahoo.com

Project: Gemusut Kakap Hull Blasting + Painting Project
Scope of Service: Blasting and Painting work
Location: Pasir Gudang, Johore

Senior Process Engineer Jobs

Dear All,

We have some immediate requirement as appended below.
 
Senior Process Engineer 

Immediate Vacancies in Kuantan

MPL Logo
MPL Group of Companies specializes in Human Resource Solutions for a broad range of industries, concentrating on supplying manpower and dealing with various issues such as human resource management, foreign labor placements and work permits.  At MPL, the combination of impeccable service delivery, best practices, industry expertise, highly experienced professionals and integrated technology makes holistic operations a business reality.

SapuraCrest Secures US$1.4b Brazil Deal

Petroleo Brasileiro awards the contract to TL Offshore, a wholly-owned unit of SapuraCrest, to charter and operate three units of pipe-laying support vessels.



Kuala Lumpur: SapuraCrest Petroleum Bhd has won a US$1.4 billion (RM4.34 billion) contract from Petroleo Brasileiro SA (Petrobras), Latin America's largest company by market value.


MECIP Global Engineers Sdn. Bhd


MECIP provides complete engineering design services to the oil & gas and petrochemical industries with expertise in both downstream and upstream industries. In partnership with affiliate companies in the US and Europe, MECIP is also able to draw technical support in highly specialized areas for specific project requirements.

Petronas Wants to Boost Its International Operations

 
KUALA LUMPUR, Oct 30 — State oil firm PETRONAS wants to upgrade its international operations by acquiring more valuable assets and exiting from less profitable ventures, The Edge newspaper reported today.

The weekly paper cited Petronas executive vice president of exploration and production Wee Yiaw Hin as saying the state-linked firm was keen on expanding in Asia, West Africa and South America.

RNZ Integrated (M) Sdn. Bhd.


RNZ Integrated is a leading provider of one-stop engineering solutions in the oil and gas industry. We aim to be the preferred one-stop resource center for our clients. We have come a long way since our inception in 1993 and today we have clients all over the world. We have encountered many challenges but have overcame them with operational efficiencies, innovative technologies and good management of our human capital at all levels and in all disciplines.

Tanjung Offshore Was Awarded 3 OSV Contracts Worth RM50 million from Petronas Carigali

KUCHING: Tanjung Offshore Bhd’s (Tanjung Offshore) vessel earning is likely to be affected by negative contribution from its other divisions.

OSK Research Sdn Bhd (OSK Research) in its report said although the vessel division was still the pillar of its business, its contribution was expected to be eroded by the company’s other divisions, especially its process equipment division, Citech Energy Recovery System UK Ltd (Citech).

MMC Amec Sdn. Bhd


MMC Amec Sdn. Bhd. is an incorporated joint-venture company between MMC Oil & Gas Engineering Sdn Bhd (51%) and AMEC Group Ltd of UK (49%).

MMC AMEC provides high value consultancy, engineering and project management services, focusing on large-scale integrated projects including deepwater as well as providing traditional greenfield and brownfield projects for both upstream and downstream sectors of the oil & gas industry. 

Dayang Received Contract Extension Worth RM1.5 Billion from Murphy


KUCHING: Dayang Enterprise Holdings Bhd (Dayang) further solidifies its estimated RM1.5 billion worth order book as it recently received a notice of contract extension from Murphy Production Operations (Murphy) for the provision of topside major maintenance services.

According to OSK Research Sdn Bhd (OSK Research) analyst, Jason Yap, “The contract was estimated to be worth about RM50 million to RM100 million and is on a ‘call-up’ basis. It is made up of work orders, awarded only at the discretion of Murphy.

Minconsult Sdn. Bhd


Minconsult Sdn Bhd, a wholly Malaysian majority Bumiputra owned company, traces its beginning to 1962 when it was originally established as Ganendra and Associates, one of the earliest indigenous firms offering independent engineering consulting services in Malaysia. This firm expanded and practised as Ganendra, Ahmad and Associates until the involvement of PERNAS in 1971 when there were changes in the structure of the firm, together with a name change to Malaysia International Consultants Sdn. Bhd. popularly known as MINCO

Electrical Engineer Jobs


I got this e-mail from head hunter for Electrical Engineer positions.

Dear,
 
As spoken earlier we have an opening for Electrical Engineer. Contract placement based in Kuala Lumpur (KL). It would be great if you could also recommend some friends as we need a few engineers.

Riggers, Pipe Fitters and Scaffholders Jobs


We need urgent resume candidate which interested to work as following position :

Cekap Technical Jobs and Career

http://www.cekaptechnical.com/

Cekap Technical Services Sdn Bhd was founded in 1994 and began business in project management. Later Cekap Technical Services expanded the range of services when the larger projects required a wider scope and an integrated multi-discipline expertise. Today the company has developed a business niche in the Malaysian Oil & Gas Industry as a provider of integrated expertise and multi-discipline services including Project Management, Project Resources, Integrated Operations, Specialty Chemicals Supply & Consultancy, IT, Information Management & Business Solutions, Subsurface and G&G Services, Meteorological, Weather Forecasting and Oceanographic Services. Cekap Technical Services track record includes projects in Malaysia, the Asean region, Middle East and North Africa, from onshore , offshore and deepwater sectors.
 

Bumi Armada Jobs and Career

 
Bumi Armada Berhad is the largest owner and operator of offshore support vessels in Malaysia and is an established and trusted service partner in the oil and gas industry. We have established a strong position in FPSO systems, a growing Transport & Installation business and competency in management of large projects. 

Labuan Shipyard Jobs and Career


Labuan Shipyard & Engineering Sdn Bhd (LSE), a subsidiary of Realmild (M) Sdn Bhd, was incorporated on 26 September 2005 and took over the facilities, operations and all business activities of Sabah Shipyard Sdn. Bhd.

The yard itself had been in existence since 1972 and had built up an extensive and proven track record in oil and gas engineering and fabrication, shipbuilding, ship repair and construction of power barges. LSE is also actively involved in the refitting, modernization and scheduled maintenance of naval crafts.

MMHE Jobs and Career


MMHE is a leading oil and gas construction and marine engineering company with capabilities for fabrication of offshore facilities that includes structures used in deepwater exploration. We are also the only yard in Malaysia capable of repairing Ultra Large Crude Carriers (ULCC) and LNG vessels and perform ship conversions.

Planner Jobs - PFCE Engineering


Job Title      : Planner/SchedulerPrimavera P6 (URGENT)
Job Type      : Contract Position (Project Based)
Discipline     : Engineering
Location       : Kerteh, Terengganu, Malaysia
Closing date : Apply by    15 December 2011

Subsea Engineer Jobs - Petra Energy

Petra Energy Berhad (“Group”) is an integrated brown field services provider with a proven track record spanning over two decades in providing a comprehensive range of services for the upstream oil and gas (O & G) industry. The Group also provides specialist services for the petrochemical and general industries in the domestic, regional and global markets.

To meet our planned expansion, we seek talents who can drive change, and deliver real growth. Simply put, we are looking for professionals who are cut above the rest.

Management Trainee - Shapadu Energy & Engineering

Shapadu Energy & Engineering Sdn Bhd

Shapadu Energy & Engineering Sdn Bhd (SEEN) is wholly owned subsidiary ofShapadu Corporation Sdn Bhd primarily involved in the oil and gas industry. SEEN has been a pioneer in Hook-Up and Commissioning Services since its inception on October 14, 1978 and has continuously developed its people, methods and approach for all its service capabilities to emerge as competent, reliable and respected bumiputra oil and gas contractor within Malaysia and the Asia Pacific Region.

Ranhill WorleyParsons Jobs

Ranhill Worley

Ranhill WorleyParsons provides Project Management and multidiscipline Engineering Services to Onshore and Offshore Oil and Gas, Refinery, Chemical, Petro-chemical, Power, Infrastructure and Paper and Pulp industries. The services rendered include a full range of Process, Mechanical, Instrumentation, Electrical, Civil, Structural, Pipeline Dynamics, Safety and Environmental, Subsea and Marine engineering. 

BEM Mandatory Course 3

                                       

SAFETY & HEALTH AT WORK 

Organized by

Board of Engineers, Malaysia 

IEM Training Centre Sdn. Bhd. 

BEM approved CPD/PDP Hours = 12. Ref: IEM10/PP/061/C 

BEM Mandatory Course 2

                                       

ENGINEERING MANAGEMENT PRACTICE 

Organized by

Board of Engineers, Malaysia 

IEM Training Centre Sdn. Bhd. 

BEM approved CPD/PDP Hours = 12. Ref: IEM10/PP/060/C 

BEM Mandatory Course 1

                                       


CODE OF ETHICS/REGULATIONS

Organized by

Board of Engineers, Malaysia 

IEM Training Centre Sdn. Bhd. 

BEM approved CPD/PDP Hours = 12. Ref: IEM10/PP/059/C 


IEM Training Scheme | BEM Training Scheme


INTRODUCTION

The objective of the Institution of Engineers, Malaysia is the advancement of engineering profession. Before becoming a Corporate member of the Institution and/or being registered under the Registration of Engineers Act, 1967 a person must have received engineering education and advanced training to standards determined by the Institution and the Board of Engineers, Malaysia.

Board of Engineers Malaysia (BEM)


The Board of Engineers Malaysia (BEM) is a statutory body constituted under the Registration of Engineers Act 1967 with perpetual succession and a common seal, which may sue and be sued. It was formed in 23rd August 1972.
BEM falls within the ambit of responsibility of the Minister of Works. Vested with wide powers, the Minister may suspend the operation of the Registration of Engineers Act 1967 (REA 1967) in any part of Malaysia by notification in the gazette. The appointment of the Board Members and the Registrar is made by the Minister.

How to Become a Professional Engineer (P.ENG @ IR)

Click to enlarge it


NEW IEM AND BEM TRAINING REQUIREMENT

The Institution of Engineers, Malaysia (IEM) and The Board of Engineers, Malaysia (BEM) will implement new training requirements for all Graduate Engineers who register from 1 January 2005

The Board of Engineer, Malaysia and The Institution of Engineers, Malaysia have decided to implement revised training requirement for graduate engineers who desire to become professional engineers. This is in view of the fact that engineering students follow varied routes in their pursuit for an engineering degree. The requirements include, beside extended training period, compulsory courses to be undertaken, participation in Professional Development Programmes (PDP) and involvement in continuing engineering education programmes. With these measures, it is hoped that we will improve the quality of our Professional Engineers who will be able to serve globally.


Process Engineering Term - W

WAITING ON CEMENT (WOC) - pertaining to the time when drilling or completion operations are suspended so that the cement in a well can harden sufficiently.

WALKAWAYS - an area cleared for moving through by personnel.

WALKING BEAM - the horizontal steel member of a beam pumping unit that has rocking or reciprocating motion.

WASH OVER - to release pipe that is stuck in the hole by running washover pipe. The washover pipe must have an outside diameter small enough to fit into the borehole but an inside diameter large enough to fit over the outside diameter of the stuck pipe. A rotary shoe, which cuts away the formation, mud, or whatever is sticking the pipe, is made up on the bottom joint of the washover pipe, and the assembly is lowered into the hole. Rotation of the assembly frees the stuck pipe. Several washovers may have to be made if the stuck portion is very long.

WASHOVER PIPE - an accessory used in fishing operations to go over the outside of tubing or drill pipe stuck in the hole because of cuttings, mud, and so forth, that have collected in the annulus. The washover pipe cleans the annular space and permits recovery of the pipe. It is sometimes called washpipe.

WASHOVER STRING - the assembly of tools run into the hole during fishing to perform a washover. A typical washover string consists of a washover back-off connector, several joints of washover pipe, and a rotary shoe.

WATER DRIVE - the reservoir drive mechanism in which oil is produced by the expansion of the underlying water and rock, which forces the oil into the wellbore. In general, there are two types of water drive: bottom-water drive, in which the oil is totally underlain by water; and edgewater drive, in which only a portion of the oil is in contact with the water.

WATER PUMP - on an engine, a device, powered by the engine, that moves coolant (water) through openings in the engine block, through the radiator or heat exchanger, and back into the block.

WATER TANK - the water tank is used to store water that is used for mud-mixing, cementing, and rig cleaning.

WATER WELL - a well drilled to obtain a fresh water supply to support drilling and production operations or to obtain a water supply to be used in connection with an enhanced recovery program.

WATER CONNING - The encroachment of water in a well bore in a water-drive reservoir owing to an excessive rate of production. The water below the oil moves upward to the well bore through channels, fissures, and permeable streaks, leaving the oil sidetracked and bypassed.

WATER FLOODING - A secondary recovery method for the production of oil from a formation. Oil will float on water. When water is injected into some formations, the oil will float or be washed to the surface, thereby, increasing the amount of production from a well or field. Some formations will not react to this type of stimulation.

WELL - A hole drilled or bored into the earth, usually cased with metal pipe, for the production of gas or oil. A hole for the injection under pressure of water or gas into a subsurface rock formation.

WELL COMPLETION - The work of preparing a newly drilled well for production. This is a costly procedure and includes setting and cementing the casing, perforating the casing, running production tubing, hanging the control valves (nippling up the production tree, i.e., Christmas tree), connecting the flow lines, and erecting the flow tanks or lease tanks.

WELL COST, AVERAGE - In 1983, the average cost to drill, case, and complete a well was $410,000. Included in this average were many deep, multimillion dollar wells - the 15,000 to 25,000-foot gas wells - any many thousands of shallower wells costing $250,000 or even less.

WELL LOGGING - Gathering and recording information about the surface formation, the nature and extent of the various downhole rock layers. Also included are records kept by the driller, the record of cuttings, core analysis drillstem tests, and electric, acoustic, and radioactivity logs. Any pertinent information about a well, written and saved, is a log - from sailing ship days.

WELL COMPLETION - The work of preparing a newly drilled well for production. This is a costly procedure and includes setting and cementing the casing, perforating the casing, running production tubing, hanging the control valves (nippling up the production tree, i.e., Christmas tree), connecting the flow lines, and erecting the flow tanks or lease tanks.

WELL COST, AVERAGE - In 1983, the average cost to drill, case, and complete a well was $410,000. Included in this average were many deep, multimillion dollar wells - the 15,000 to 25,000-foot gas wells - any many thousands of shallower wells costing $250,000 or even less.

WELL LOGGING - Gathering and recording information about the surface formation, the nature and extent of the various downhole rock layers. Also included are records kept by the driller, the record of cuttings, core analysis drillstem tests, and electric, acoustic, and radioactivity logs. Any pertinent information about a well, written and saved, is a log - from sailing ship days.

WEIGHT INDICATOR - an instrument near the driller’s position on a drilling rig that shows both the weight of the drill stem that is hanging from the hook (hook load) and the weight that is placed on the bottom of the hole (weight on bit).

WEIGHT Oweight on bit (WOB) - the amount of downward force placed on the bit.

WELL - the hole made by the drilling bit, which can be open, cased, or both. Also called borehole, hole, or wellbore.

WELLBORE - a borehole; the hole drilled by the bit. A wellbore may have casing in it or it may be open (uncased); or part of it may be cased, and part of it may be open. Also called a borehole or hole.

WELLBORE SOAK - an acidizing treatment in which the acid is placed in the wellbore and allowed to react by merely soaking. It is a relatively slow process, because very little of the acid actually comes in contact with the formation. Also called wellbore cleanup. Compare acid fracture.

WELL COMPLETION - 1. the activities and methods of preparing a well for the production of oil and gas or for other purposes, such as injection; the method by which one or more flow paths for hydrocarbons are established between the reservoir and the surface. 2. the system of tubulars, packers, and other tools installed beneath the wellhead in the production casing; that is, the tool assembly that provides the hydrocarbon flow path or paths.

WELL CONTROL - the methods used to control a kick and prevent a well from blowing out. Such techniques include, but are not limited to, keeping the borehole completely filled with drilling mud of the proper weight or density during operations, exercising reasonable care when tripping pipe out of the hole to prevent swabbing, and keeping careful track of the amount of mud put into the hole to replace the volume of pipe removed from the hole during a trip.

WELL FLUID - the fluid, usually a combination of gas, oil, water, and suspended sediment, that comes out of a reservoir. Also called well stream.

WELLHEAD - the equipment installed at the surface of the wellbore. A wellhead includes such equipment as the casinghead and tubing head. adj: pertaining to the wellhead.

WELL LOGGING - the recording of information about subsurface geologic formations, including records kept by the driller and records of mud and cutting analyses, core analysis, drill stem tests, and electric, acoustic, and radioactivity procedures.

WELL SERVICING - the maintenance work performed on an oil or gas well to improve or maintain the production from a formation already producing. It usually involves repairs to the pump, rods, gas-lift valves, tubing, packers, and so forth.

WELL-SERVICING RIG
 - a portable rig, truck-mounted, trailer-mounted, or a carrier rig, consisting of a hoist and engine with a self-erecting mast. See carrier rig. Compare workover rig.

WELL STIMULATION - any of several operations used to increase the production of a well, such as acidizing or fracturing. See acidize.

WHIPSTOCK - A tool used at the bottom of the borehole to change the direction of the drilling bit. The whipstock is, essentially, a wedge that crowds the bit to the side of the hole, causing it to drill at an angle to the vertical.

WHITE OIL - A colloquial term for condensate, gas condensate, casinghead gasoline; liquid hydrocarbons produced with natural gas.

WILDCAT - A well that is drained one or more miles from a proven well.

WICKERS - broken or frayed strands of the steel wire that makes up the outer wrapping of wire rope.

WINDOW - 1. a slotted opening or a full section removed in the pipe lining (casing) of a well, usually made to permit sidetracking.

WIRELINE - a slender, rodlike or threadlike piece of metal usually small in diameter, that is used for lowering special tools (such as logging sondes, perforating guns, and so forth) into the well. Also called slick line.

WIRELINE FORMATION TESTER - a formation fluid sampling device, actually run on conductor line rather than wireline, that also logs flow and shut-in pressure in rock near the borehole. A spring mechanism holds a pad firmly against the sidewall while a piston creates a vacuum in a test chamber. Formation fluids enter the test chamber through a valve in the pad. A recorder logs the rate at which the test chamber is filled. Fluids may also be drawn to fill a sampling chamber. Wireline formation tests may be done any number of times during one trip in the hole, so they are very useful in formation testing.

WIRELINE LOG - any log that is run on wireline.

WIRELINE OPERATIONS - the lowering of mechanical tools, such as valves and fishing tools, into the well for various purposes. Electric wireline operations, such as electric well logging and perforating, involve the use of conductor line.

WIRELINE SURVEY - a general term used to refer to any type of log being run in a well.

WIRELINE TOOLS - special tools or equipment made to be lowered into and retrieved from the well on a wireline, for example, packers, swabs, gas-lift valves, measuring devices.

WIRE ROPE - a cable composed of steel wires twisted around a central core of fiber or steel wire to create a rope of great strength and considerable flexibility.

WORKOVER FLUID - a special drilling mud used to keep a well under control while it is being worked over. A workover fluid is compounded carefully so that it will not cause formation damage.

WORKOVER RIG - a portable rig used for working over a well.

WORK STRING - 1. in drilling, the string of drill pipe or tubing suspended in a well to which is attached a special tool or device that is used to carry out a certain task, such as squeeze cementing or fishing. 2. in pipeline construction, the string of washpipe that replaces the pilot string in a directionally drilled river crossing. The work string remains in place under the river until the actual pipeline is made up and is ready to be pulled back across the river.

WORKING INTEREST - A working interest in an oil or gas property is one that is burdened with the cost of development and operation of the property, such as the responsibility to share expenses of drilling completing or operating an oil and gas property, according to working or operating mineral interest in any tract or parcel of land. Rights to overriding royalties, production payments, and the like do not constitute working interests because they are not burdened with the responsibility to share expenses of drilling, completing, or operating oil and gas property. Likewise, contract rights to extract or share in oil and gas, or in the profits from extraction, without liability to share in the costs of production do not constitute working interests.

WORKOVER - Operations on a producing well to restore or increase production. Tubing is pulled and the casing at the bottom of the well is pumped or washed free of sand that may have accumulated. The performance of one or more of a variety of remedial operations on a producing well to try to increase production. Examples of workover jobs are deepening, plugging back, pulling and resetting liners, and squeeze cementing.

WRITE-OFFS - That portion of an oil investment which is deductible for tax purposes. All intangibles are deductible.